What is flocking powder

The Photo-Stik blue did well for flat covering, as did the adhesive runner pink ; however, the adhesive runner has dotted adhesive so the dots can be seen through the flocking. The hour difference of removing the excess powder did not seem to have an effect. However, the next day when I touched my sample pieces, the flocking seemed to stay put and not flake off versus if I had just touched it previously. I think it is a good idea to let your flocked project sit overnight or at least a couple hours before doing anything else with it especially touching it.

Some on the web recommend leaving the flocking part as the last part of your project. Be sure to 'mix' or 'fluff' your flocking before use. If you haven't used your flocking in awhile, it will settle and pack together.

The blue flocking on the left shows what it looks like after it has been stirred, and the pink flocking on the left shows what it looks like when you first take off the lid. I found a video on YouTube describing use of a Cuttlebug or Sizzix Texture Boutique to press down the flocking into the paper surface to set it so that it would not flake off.

I used smaller die cuts; maybe this technique works better with a larger piece. Flocking is the process of depositing many small fiber particles called flock onto a surface. It can also refer to the texture produced by the process, or to any material used primarily for its flocked surface.

The spray-on artificial snow products are called snow spray, flocking snow, or holiday snow. Inhalation of methylene chloride can cause toxicity depending on the severity of the exposure. If you want to get technical, flocking is the process of creating texture by attaching tiny fibers to a material. But when talking about Christmas trees , flocking means to give it that natural, snow-covered look by applying a white, powdery mixture to the branches. Save my name, email, and website in this browser for the next time I comment.

Press ESC to close. What is flocking powder made of? Wikipedikia Editors 7 Min Read. Table of Contents. Collect sawdust that has been generated by sanding, not sawing. Squeeze paint onto a plastic mixing tray and spread it into a thin layer. Squeeze the paint into a plastic bucket large enough to hold all the flocking if you are making a large quantity of it.

Place the sawdust or twine in the paint. Step 1: Materials: 1 bar Ivory Soap. There are many different ways that flocking powder can be added to rubber stamping projects. One of the easiest ways of using flock is to simply add glue to the surface of a project and pour flocking powder over the top. Another way of using flocking powder to create a velvet texture on rubber stamping projects is to use a glue pad and rubber stamps.

Glue pads are similar to ink pads, however, instead of containing ink, they contain glue. You simply take a rubber stamp that you would normally use with an ink pad and use it with the glue pad. You stamp an image in glue onto a page and then cover it with flocking powder.

The fibers adhere to the sticky glue. A quick and convenient alternative to using glue is to use double-sided tape or stickers. To use double-sided tape simply cut it to the right shape or use a special hole puncher customized to punch certain shapes and attach this to the surface of a rubber-stamping project. Remove the protective paper and cover this with flocking powder. Stickers are a convenient way of adding flocked shapes to projects.

Use a self-adhesive sticker and carefully remove it from its protective backing, pour flocking powder over the exposed adhesive surface and use glue to attach the sticker to a project. Another way of using flocking powder is to use an adhesive powder.

Carefully sprinkle a layer of flocking powder over the glue. A little goes a long way, so be sure not to use too much of your powder. Let the first layer of glue dry completely, then add a second coat of flocking powder if you desire solid coverage on your design.

You can use a heat tool on the underside of the paper to speed up the drying process if needed, but don't apply heat to the top of the design as this will simply blow your powder all over your work area.

Roll your scratch paper up like a funnel, then pour excess flocking powder back in the jar for use during another project. Place another sheet of scratch paper over the top of your flocked design, then run over it with a brayer.

The pressure of the brayer will make the powder stick more firmly. Ideas for Using Flocking Powder The easiest way to learn how to use flocking powder for scrapbooking is to simply stamp an entire shape in flocking powder.

How to Embellish Die Cuts. By Jennifer L. Scrapbook Paper With Stars.